American Audio PRO DJ 3 - Manual (Page 9)

memory (see setting CUE POINTS on page 12).
33. PROGRAM INDICATOR - This indicates you
are in program mode or program play mode.
34. SINGLE INDICATOR - This indicates that the
CD drive is in single play mode, the track will play
once and return to CUE mode. If the single indi-
cator is not on the unit is in continuous mode. In
continuous mode the drive will play all the
remaining tracks on the disc. Once the remaining
tracks have ended the unit will return to cue
mode.
35. TOTAL INDICATOR - When TOTAL is indi-
cated in the LCD DISPLAY (21) the TIME
DESCRIBED (44) in the LCD will define the total
combined remaining time of all the tracks on the
disc.
36. REMAIN INDICATOR - in the LCD display
will define the indicated time as the time remain-
ing on the current track.
37. PITCH METER - This meter displays the pitch
percentage being applied to the disc playback by
the PITCH SLIDER (18). The meters definition
will be indicated by PITCH (39) in the LCD dis-
play.
38. LOOP - Appears when the seamless loop is
engaged or is ready to be engaged. LOOP will
flash in the LCD DISPLAY (21) when a loop is
being played.
39. PITCH INDICATOR - This will indicate that
the measurement being displayed is the pitch
percentage.
40. RELOOP INDICATOR - Appears when LOOP
is engaged or ready to be engaged. LOOP (38)
flashes in LCD DISPLAY (21) when playing loop.
41. SAMPLE BANK INDICATORS - These indica-
tors (1~6) will Indicates which of CUE BUTTON
(1~6) store samples. This indicator will also flash
the number of the last sample played.
42. MEMORY BUCKET INDICATOR - This indi-
cates the cue memory state. Four bars indicate
memory is full and no bars indicate memory is
empty.
43. TRACK INDICATOR - This indicator describes
which track is currently being played or is cued.
44. TIME METER - This meter will display the
elapse, total, or remaining time of the disc or track.
The display time will depend on the selected func-
tion. The selected function will be displayed above
the TIME METER as TOTAL REMAIN (35),
REMAIN (36) OR ELAPSE (45).
45. ELAPSE INDICATOR - When this indicator is
on it will define the time displayed in the TIME
METER (47) as the current track’s elapse time.
46. TIME BAR INDICATOR - Shows the time
length defined in the TIME METER (44). As with
the TIME METER (44) this bar is also dependent
on the selected function displayed above the TIME
METER as TOTAL REMAIN (35), REMAIN (36)
OR ELAPSE (45). This bar will also begin to flash
when a track is ending regardless of which time
function you are in. The flashing bar is great
reminder, that time is running out to get that next
track ready to go.
43
30 31 32 33 34 39 38 37
42
46
35
40
41
Figure 6
36
45
44
GENERAL FUNCTIONS AND CONTROLS (Cont.)
American DJ ® AUDIO •PRO DJ3™ INSTRUCTION MANUAL • PAGE 9