Konica Minolta bizhub C650 - Manual (Page 114)

C650 3-40
Administrator mode 3
3.4 Print Setting tab
Information and settings concerning the connection interface and default print settings are displayed on the
Print Setting tab.
Basic Setting
The default printer settings can be specified.
2
Reminder
The Staple settings are available only if the optional finisher is installed.
The Punch settings are available only if the optional finisher is installed.
Item Description
PDL Setting Select the printer definition language.
Paper Tray Select the paper tray.
Output Tray Select the output tray.
2-Sided Print Select whether or not double-sided printing is performed.
Bind Direction Select the binding position.
Staple Select the desired Staple setting.
Punch Select the desired Punch setting.
Number of Sets Specify the number of copies to be printed.
Default Paper Size Select the paper size.
Original Direction Select the document orientation.
Spool Print Jobs in HDD before
RIP Select the desired spooling setting.
Banner Sheet Setting Select whether or not banner pages can be printed.
Banner Sheet Paper Tray Select the paper tray used to print banner pages.
No Matching Paper in Tray Set-
ting Select the operation that is performed when there is no paper of the appropriate
size in the specified paper tray.
Switch Trays (Tray Priority): Supply paper from a different paper tray.
Stop Printing (Tray Fixed): A warning message appears and printing stops.
A4/A3<->LTR/LGR Auto
Switch Select whether or not to print an A4 (Letter)/A3 (Ledger) document when a paper
tray containing Letter (A4)/Ledger (A3) paper is selected
Binding Direction Adjustment Select "Finishing Priority", "Productivity Priority" or "Control Adjustments".