Sending a fax manually using the on hook key, Sending a fax manually using the on hook key -18 – Konica Minolta magicolor 1690MF User Manual

Page 61

Advertising
background image

Sending a Fax Manually

3-18

3

Pick up the handset and check that the dial tone can be heard.

4

Specify the fax number of the recipient by using the telephone to dial the
fax number.

"

The fax number of the recipient can also specified using the keypad in
the control panel of this machine.

"

If Pulse is selected as the telephone line type, press the key to tem-
porarily change the line type to Tone.

5

After finishing talking on the phone, the recipient should press the neces-
sary key to start receiving the fax.
Once the recipient’s fax machine is ready, a beep is sounded.

6

Press the Start key to begin scanning and sending the fax.

7

Replace the handset to its cradle.

"

To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select
YES,
and then press the Select key.

Sending a Fax Manually Using the On Hook Key

"

Manual transmission cannot be used together with duplex (dou-
ble-sided) document transmission.

1

Load the document into the ADF.

"

When sending a fax manually, load the document into the ADF. An
error will occur if the document is placed on the original glass.

"

For details on loading the document into the ADF, refer to “Sending a
Fax Using the ADF” on page 3-2
.

2

If desired, adjust the image quality.

"

The document image quality can be adjusted. For details, refer to
“Adjusting the Image Quality” on page 3-6.

3

Press the On hook key.

4

Specify the fax number of the recipient.

"

The keys for registered destinations can be used even if the On hook
key has been pressed. For details, refer to “Specifying a Recipient” on
page 3-7.
(Group dial destinations cannot be specified.)

"

If Pulse is selected as the telephone line type, press the key to tem-
porarily change the line type to Tone.

Advertising