Konica Minolta bizhub C200 - Manual (Page 76)

C200 1-3
Basic operations 1
Ba
sic op
er
at
ions
Chapter 1
– Simplex/Duplex: Change the setting when copying double-sided originals or making double-sided
copies of single-sided originals. As a factory default, "1>1" is selected.
– Recall Program: Programmed copy settings can be recalled to be used again for copying.
– Finishing: The printed pages can be sorted by pages or by copies.
– Mixed Original: Originals of different sizes can be loaded together into the ADF to be fed and
scanned one by one automatically. In addition, if folded originals are loaded into the ADF to be
copied, the original size is correctly detected.
– For details, refer to chapter 2, "Basic copy operations", and chapter 3, "Additional copy operations",
of the User’s Guide [Copy Operations].
3
Type in the desired number of copies.
– To change the number of copies, press the [C] (clear) key, and then type in the desired number.
– To use the various copy functions, touch [Application], and then specify the desired settings. For
details, refer to chapter 7, "Application functions", of the User’s Guide [Copy Operations].