ADS Technologies ProDVD API-408 - Manual (Page 14)

14
Step 5
Windows will now inform you it is ready
to install your new driver. Verify that the
path is the same as the picture to the
left. It should read “C:\WINDOWS\INF\
1394.INF”
Now click the “Next” button.
Step 6
Congratulations! You are now done with
the driver installation. All that is needed
from you now is to click the “Finish” but-
ton.
2.) CAMCORDER DRIVER INSTALLATION
1. DO NOT PLUG YOUR CAMCORDER INTO THE PYRO
BOARD UNTIL YOU HAVE INSTALLED THE CAMCORDER
DRIVERS from PYRO CD #1.
2. Insert the PYRO 1394DV CD into your CD-ROM drive.
INSTALL DRIVERS. The driver install will automatically install
the correct version drivers to match your operating system.
THE DRIVERS WILL INSTALL ONLY IF YOUR PYRO CARD IS
INSTALLED FIRST.
3. If you have Windows ME or Windows 2000 it may not be
necessary to install any camcorder drivers.