Audiovox Mobile Video 128-8342 - Manual (Page 20)

20
TURNING THE UNIT ON OR OFF
1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a
Comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use.
2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will
illuminate the controls.
3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture
quality.
4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.
Power
ON/OFF
Button
Remote Sensor
Infrared Transmitter
Screen Release
OVERHEAD DOME LIGHTS
The Dome Lights integrated into the VOD86 are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights
,
ON. The OFF position will prevent the lights from turning ON with the vehicle s interior lighting, and the auto position will allow the lights to turn
,
ON and OFF with the vehicle s interior lighting. Refer to the Installation Guide for wire connections. Do not leave the vehicle unattended with the
dome light switch in the ON position, as this could result in a discharged battery.
REMOTE SENSOR
The VOD86 infrared remote sensors to relay signals to the unit when the remote control is pointed at the remote sensor.