Konica Minolta BIZHUB C30P - Manual (Page 44)

PageScope Data Administrator 3
PageScope Data Administrator 3-35
– Directory name: Input a name for the current details.
– LDAP server address: Input the IP address or DNS name of the di-
rectory server. If using SSL, input the DNS name.
– Search base: Input the search base. (Up to 512 characters)
(E.g.)
ou=sales division, dc=ABCDEFG, dc=com
Consult with the LDAP administrator about search bases to input.
– Port number: Specify the port number to be used when accessing
LDAP servers.
– SSL: Select when using SSL for LDAP communications.
It is recommended that you use SSL for secure transmission. Not
using SSL means that LDAP data will be transmitted over the net-
work in unsafe ASCII format.
– Search maximum number: Specify the maximum number of items
to show when searching.
– Timeout settings: Specify the transmission timeout for the LDAP
server. (1-120 sec)
– Authentication (Anonymous, Simple, NTLM): Select the BIND type
for the LDAP server. Select NTLM when connecting to an Active Di-
rectory.
– Domain name: Input the domain name.
Input
Domain Name when connecting to an Active Directory.
– User name: This field can be entered when authentication is not set
to
Anonymous .
– Password: This field can be entered when authentication is not set
to
Anonymous .
– Password (Confirmation): Re-input password for confirmation.
4
Set LDAP server access settings, and click OK .
The LDAP server access settings are added.