Anthem Audio ANTHEM D2V - Manual (Page 57)

49
3. SETUP
continued …
Advanced:
After a file is created in Standard mode, it can be opened in Advanced mode to change correction range and
room gain. To do this, change Targets then click on Calculate, then Upload.
Since rooms and systems vary the only advice that Anthem technical support can provide without being
at your house to hear your system is to use the auto-detected settings. The alternative is trial and error.
To change the amount of room gain, the Force checkbox has to be checked for the manually entered change
in dB to take effect once clicking on Calculate. To restore the settings sensed by ARC, click on Auto Detect
and re-calculate. Clicking on Erase uploads flat parameters.
Updating ARC:
Check www.anthemAV.com periodically for ARC software updates. The download contains revision history,
which may also indicate that the processor requires an update for the ARC version to work correctly.
If a newer version is posted and you would like to use it, check your current version:
• Run Anthem Room Correction in Advanced mode.
• Click on Help then click on About. The version number will be displayed.
Proceed only if your version is not the latest:
• Download the latest software from our web site to Desktop.
• When download is complete, right-click on the downloaded .zip file and extract it to Desktop.
• Open the extracted folder and double click on setup. Software installation instructions will appear
on your screen. If you are installing ARC on the computer for the first time, copy your two
serialized files from your software CD to the extracted folder on Desktop before double-clicking
on setup. This way they will be added to Program Files as the software is installed.
• When installation is complete, you can delete the downloaded file and the extracted folder.