ATEN UC-232A - Manual (Page 13)

- 13 -
3. Click to accept the terms of the license agreement, then click
Next to install the driver. When the installation is complete,
the following dialog box appears:
4. Click Finish to close the wizard. You have successfully
installed the driver. You can now proceed to connect the UC-
232A.
Connecting the UC-232A
1. Connect the UC-232A USB-to-Serial Converter to a USB port
in your computer. The following dialog box appears to confirm
that the driver has been installed and that your UC-232A is
ready to use:
uc232a.fm Page 13 Monday, July 23, 2007 3:36 PM