ATEN UC-232A - Manual (Page 14)

- 14 -
Mac Installation
Installing the Software
Mac OS 9
1. Insert the installation disk into the CD-ROM drive.
2. Open the CD-ROM Folder, then open the MAC folder.
3. Copy the Mac OS 9 file (UC-232_OS9_vxxxxx.hqx) to your
hard disk.
4. Double-click on the file icon to extract the compressed file(s).
5. Copy the extracted file(s) to the Hard Disk > System Folder >
Extensions folder.
Note: If you are using a non-English language version, copy
the files to the corresponding folder for your system.
Mac OS X
1. Insert the installation disk into the CD-ROM drive.
2. Open the CD-ROM folder, then open the MAC folder.
3. Copy the Mac OS X file (UC-232_OSX_vxxxxx.hqx) to your
hard disk.
4. Double-click on the file icon to extract the compressed file.
5. Double-click the extracted file to begin installing the software.
6. Follow the on-screen instructions to complete the software
installation.
Connecting the UC-232A
Connect the UC-232A to a USB port on your Mac.
Note: The UC-232A will not function properly unless the
software was previously installed.
uc232a.fm Page 14 Monday, July 23, 2007 3:36 PM