Xerox DocuColor 8000 User Manual
Page 9
For more information on Genuine Xerox Supplies, call 1-800-822-2200 in the USA and 1800-668-0133 in Canada
9
quickly. Please ensure that print quality meets your requirements before committing to extended
usage.
Lastly, Xerox Premium Digital Carbonless paper may react with the residual debris left behind by
non-Xerox branded carbonless materials resulting in significant and immediate contamination of
machine components. If a non-Xerox branded material has been run prior to running Xerox Premium
Digital Carbonless it is suggested that all components, in direct contact with the paper, be replaced to
ensure trouble free operation.
2-Sided Print ing on Heavyw eight Papers
It is possible to automatically print two-sided documents on Xerox Heavyweight (>220 gsm) papers
with DocuColor 7000 / 7000AP / 8000 / 8000AP systems by setting the machine to the 186 – 220
gsm weight setting. While this weight setting is slightly less than the actual basis weight of these
papers, it has been determined through testing that performance will not be compromised. There are,
however, some adjustments that may be required.
Custom Paper Profiles (2
nd
BTB) will allow you to adjust machine parameters to achieve optimum
Image Quality, and color rendition. This adjustment should be performed at regular intervals, and
more frequently for heavier weight papers, to maintain consistent output. Refer to the
DocuColor
8000 / 7000 System Administration Guide
for instructions on programming these settings.
The following settings should be used for reference only. Environmental factors and job parameters
may require additional adjustment.
2
nd
BTB
Decurler
100# Digital Color Elite Gloss
Side 1: 80
Side 2: 80
"B" Simp
"A" Dup
110# Digital Color Elite Gloss
Side 1: 110
Side 2: 100
"B" Simp
"A" Dup
100# Digital Color Elite Silk
Side 1: 110
Side 2: 70
"B" Simp
"A" Dup
110# Digital Color Elite Silk
Side 1: 100
Side 2: 90
"B" Simp
"A" Dup
12 pt. Supreme Gloss
Side 1: 90
Side 2: 110
"A" Simp
"A" Dup
100# Graphic Xpressions
Side 1: 90
Side 2: 100
"B" Simp
"A" Dup
Also, Xerox Digital Color Supreme Gloss 12pt. must be loaded in the tray such that the uncoated side
is imaged first (up) to avoid scratching the soft coating material.
Media and Applic at ions Not in t he Rec om m ended Mat erials List
DISCLAIMER: The information in this section is intended only for those who have a specific
request to use a special material or application in the DocuColor 8000 / 7000 that is not on the
Recommended Materials List. It must be understood that running these types of jobs may
result in degraded image quality, an increase in jams, an increase in service calls, or, in the