Aiwa CDC-X527M - Manual (Page 7)

ENGLISH
6
ENGLISH
6
AUDIO
CONTROL
OTHER FUNCTIONS
SRC
Changing the key illumination color
You can choose blue or red as the key illumination color.
1 Press and hold SRC until “ILL” appears on the
display.
2 Turn AUDIO CONTROL to select “1 (for blue)” or “2
(for red).”
Setting the dimmer of the display
1 Press and hold SEL until “D” appears on the display.
2 Turn AUDIO CONTROL to select “0 (bright)” or
“1 (dimmed).”
CARD REMOTE
CONTROL
Names of parts
BAND TAPE
CD CD-CH
FF REW
TUNING / DISC
VOLUME
SKIP
UP
DOWN
1 BAND button
2 TAPE button (This button is not available with this
unit.)
3 CD button
4 CD-CH button (CD changer only)
5 SKIP f /REW button
6 SKIP g /FF button
7 PS (preset) button
8 TUNING/DISC UP/DOWN buttons
9 VOLUME + / - buttons
Preparations
A lithium battery is installed in the remote control at the
factory.
Before you use the remote control, be sure to remove
the insulating sheet by simply pulling it out.
Replacing the battery
1 Insert the tip of a pointed object A into the hole B
and pull out the battery holder to remove the lithium
battery (CR2025).
Remote control (back)
Battery holder
2 Install a new lithium battery (CR2025) with the )
side facing up in the battery holder.
3 Push the battery holder into the unit until it clicks.
CAUTION
• Keep the lithium battery out of the reach of children. If
swallowed, consult a doctor immediately.
• To prevent a short circuit, never pinch the battery with
pliers, etc.
Remote control (back)
Insulating sheet