Xerox DocuColor 242-252-260 con built-in Fiery controller-16185 - Manual (Page 4)

Page 4 of 4
Copyright 2010© Electronics for Imaging, INC. Customer Support Release note template v1.0
UNKNOWN. The issue is with the driver that generates %%EFFor as blank,
either it should not be present or it should have a value.
3. If any prerequisites listed below, they must be installed in the order specified
before applying the 1-18SMZM.ps patch:

PRODID

1-U8E58
4. This patch is exclusive, it must be installed by itself, and the server must be
rebooted or restarted once. After that, other patches can be applied to the server.
Patch installation instruction
1. Make sure that the Fiery is Idle.
2. Import the patch file 1-18SMZM.ps using Command Workstation to the Direct
queue.
3. You must wait until the file finishes processing and CWS or LCD show Idle. This
ensures the patch file is completely processed. User should wait one minute for
complete installation of patch.
4. From Command WorkStation, choose Server, Reboot Server, or from the Fiery
LCD, select Shut down, Reboot System.
5. Wait until the Fiery comes to Idle and print the configuration page.
6. Verify that the System Update Log contains the patch number 1-18SMZM
.
7. NOTE: Do NOT modify any settings or print any jobs until the patch shows up on
the printed configuration page. Since this is a larger composite patch it will take
longer than an individual patch.