Xerox DocuColor 242-252-260 con Creo Spire CX260-15300 - Manual

Print On-Demand Solutions
HaTnufa 7
P. O. Box 10193
Petach Tikva 49002 Israel
Tel: +972.3.916.7222
Fax:+972.3.928.6000
www.printondemandsolutions.com
Internal: 734-00647A-EN
Release date: August, 2007
Page 1 of 4
Setting up LPR Printer on the Spire Color Server
Before you begin, make sure that LPR is installed on your Windows 2000, 2000 Pro, XP and 2003
computer. Installing this type of port can be done from the Add/Removed Programs -> Add/Remove
Windows components and the Windows installation CD.
Perform the following steps when you set up an LPR printer:
1. Click Start and select Settings > Printers and Faxes (Windows XP) or Printers (Windows 2000,
2000 Pro, XP and 2003).
2. Select Add Printer. The Add Printer wizard window appears.
3. Click Next.
4. Select Local printer attached to this computer, and click Next.
5. Select create a new port.
6. From the Type of port list, select LPR Port and click Next.
7. In the Add LPR compatible printer box type the IP address or the exact name of the server and the
exact name of the Spire Virtual Printer you want to use, Click OK