Xerox Stampante digitale a colori Xerox 700i-700 con Xerox EX Print Server powered by Fiery-15952 - Manual (Page 7)

Page 7
When you send an RDO (raster data object) file to the EX Print Server and insert tabs in
Command WorkStation, the tab text does not print correctly on the right-hand side. To avoid
this, insert tabs in FreeFlow Makeready or send the job to Command WorkStation as a PDF
(not RDO) file.
N OTE : The file must be saved with the .RDO extension. If you override the job name found in
Job Notes, make sure that the job name ends with the .RDO extension. An RDO file that
contains precut tabs must print to the Fiery Print queue or Hold queue. Also, if you process
and hold the job in Command WorkStation, the job will lose its precut tab attributes and any
text on the tabs will not print.
Limitations and
workarounds Stapling landscape jobs
Certain staple settings for Landscape jobs staple in the opposite corner that you specify when
printing to the digital press from a EX Print Server IPP print path as follows:
• 1 Staple - Top Right Landscape prints out as 1 Staple - Top Left Landscape
• 1 Staple - Top Left Landscape prints out as 1 Staple - Top Right Landscape
To avoid this, from FreeFlow, select:
• 1 Staple - Top Right Landscape to staple the top left corner of the landscape page
or select:
• 1 Staple - Top Left Landscape to staple the top right corner of the landscape page