Asus Dual Pentium III Group Server AP200 - Manual (Page 27)

27
IV. Hardware Setup
AP200 Hardware Reference Guide
IV
. HW Setup
Power Supply
4-9. Power Supply
Removing the Power Supply
Unmounting the power supply must be done from the inside of the chassis.
Remove the left panel of the chassis and the four screws securing the power
supply. Press inward to release the power supply.
Press inward to release
the power supply.
Power Supply Unmounted
ATX Power Button
The DC power button, secured by two screws, is located on the front panel
of the chassis.
Power Button Screws
Buttons on the Front Panel
Reset Button
Infrared Window
(reserved)