Personalisation – Ariston A1437 User Manual

Page 7

Advertising
background image

7

The spin speed can be lowered, or the spin cycle can
be excluded altogether by selecting symbol .
The washing machine will automatically prevent you
from selecting a spin speed higher than the maximum
speed for each programme.

Functions

To enable a function:
1. press the button corresponding to the desired

function, according to the table below.

2. the function is selected when the corresponding

LED is illuminated.

!

The rapid flashing of the LED indicates that the

corresponding function cannot be selected for the
programme set.

Setting the temperature

Turn the TEMPERATURE knob to set the wash
temperature (

see Programmes Table

).

The temperature can be lowered, or even set to cold
wash ( ).

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for
the programme selected.
The maximum spin speeds for each programme are
as follows:

Programmes

Maximum spin speed

Cotton

1600rpm - Model A1637
1400rpm - Model A1437
1200rpm - Model A1237

Synthetics

800rpm

Wool

600rpm

Silk

no

Personalisation

Option

Effect

Comments

Available with
programmes

All

Delay Timer

Delays the start
of the wash by
up to 9 hours.

Press the button repeatedly until the LED corresponding to the
desired delay is turned on.
The fifth time the button is pressed, the function will be disabled.
N.B. Once you have pressed the START/RESET button, the
delay can only be decreased if you wish to modify it.

1,2,3,5,6,7,8.

Super Wash

Allows for an
impeccable
wash, visibly
whiter than a
standard

Class A

wash.

This function is incompatible with the RAPID function.

All

programmes

except for

1,2,4,9,10 and

Draining

Easy Iron

This option
reduces the
amount of
creasing on
fabrics, making
them easy to iron.

When this function is set, programmes 6, 7, 8, 11 and Delicate
rinse will end with the laundry left to soak (Anti-crease) and the
Rinse cycle phase LED will flash.
- to conclude the cycle, press the START/RESET button.
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/RESET button.

1,2,3,5,6,7,8.

Rapid

Cuts the duration
of the wash cycle
by 30%.

This function is incompatible with the SUPER WASH
function.

1,2,3,4,5,6,7,8.

(Model A1237

only)

Extra Rinse

Adds one extra
rinse cycle.

Remember - you will use more water than with a standard
cycle.

Function table

GB

Advertising
This manual is related to the following products: