Alcatel Carrier Internetworking Solutions OT-600 - Manual (Page 25)

48
9
Tools ................................
9.1 Bluetooth™ (1)
Access this feature by selecting “Tools” from the main menu, then
“Bluetooth”.
To use your phone with a Bluetooth device, you need to proceed in two
steps:
- Pair and register the device to your phone,
- Select it to use hands-free communication. Only one Bluetooth audio
device (your Bluetooth headset or your Bluetooth car kit) can be
connected during the communication.
Pair and register your Bluetooth device
Activate the Bluetooth feature by selecting the “Tools\Bluetooth\
Activation\On” option. Then enter the “Device list” menu to search for
connectable Bluetooth devices and select the device you want to be
paired with in the list. If the bluetooth device has no keyboard, enter its
default password to register it with your phone. If the Bluetooth device
has keyboard/keypad, enter the same set of password on both handset and
the device to get it registered.
From the list, press the “Options” softkey to connect/disconnect, rename,
search for new devices or delete an unconnected one from the list.
(1) You are highly recommended to use Alcatel OT-BM81 (mono)
Bluetooth headsets, which have been tested and proved fully
compatible with OT-600.
Activate phone • It is requested each time as the phone is powered
code on if this code is activated.
Change phone • Change phone password, its initial one is 1234.
code
Fixed dialed • It allows the phone to be "locked" so that it can only
number dial certain numbers, or numbers with certain
prefixes. To activate this function, PIN2 code is
mandatory.
8.7.8 Networks
Network selection
• Preferred • List of networks to which you wish to be connected
networks in order of priority (update this list using ).
• Select network • The choice of the network connection is left up to
the user.
• Search mode • Network connection switching between "Manual"
and "Automatic".
GPRS connection (1)
• When needed • GPRS mode active depending on connection
requirements.
• Always • GPRS mode continuously active.
8.7.9 Connectivity
A set of profile settings for messaging (MMS, IMPS...) and WAP connection.
47
(1) Depending on network availability.
600_UM_GB-03-03-09:600_UM_GB_15-01-09 3/3/2009 2:56 PM Page 47