Xerox DocuColor 1632-1281 - Manual (Page 23)

USER GUIDE
(T
ROUBLESHOOTING)
5–19
U S E R G U I D E (T R O U B L E S H O O T I N G )
Corner Shift appears in
the wrong area on the
copy If the document is positioned on the Document Glass in the short
edge direction, and the paper used for copying is in the long edge
feed direction, the copy will appear to be positioning the corner shift
selection in the wrong corner. Corner shift selections are referenced
from the Document Glass location.
NOTE: Corner Shift is also intended only for documents that are
smaller than the copy paper selected.
Copies have black
borders. Large black
borders appear on the
copies with documents
smaller than the copy
paper size. – No shift is selected. Select Auto Center to eliminate the black
borders.
– Also, select the Auto Center feature to eliminate the black when
using the Duplex Automatic Document Feeder (DADF).
Copies made from a
newspaper, a map, or a
photograph have
background when
Original Type is defined
as Map or Photo. – The DocuColor Series printer/copier detects low densities of color
and reproduces them. This is especially true with the Maps and
Photo options. The background can be reproduced or eliminated
by adjusting the Lighter/Darker feature toward lighter.
– Newspaper show-through can be reduced or eliminated by
backing the document with a black sheet of paper.
– Use the Auto Exposure option in the Image Quality tab.
The image density of
the copy seems lighter
toward the trail edge This defect is noticeable only when the input document has large
solid areas. To reduce or eliminate this defect, select the Photo
option in the Original Type feature of the Image Quality tab.
Problem Suggested Solution