Xerox 4112-4127 Enterprise Printing System-4611 User Manual
Page 74
Setups
3-58
Xerox 4112/4127 EPS
System Administration Guide
6.
Enter the measurement value you obtained in the previous step in Values A & B Before
Adjustment, and the final value you want after adjustment in Desired Values A & B.
Tip
Set value A and value B so that an edge of the paper does not extend past a fold position
of the paper. An edge of paper extending past a fold position of the paper may cause a
paper jam.
7.
Press Sample Printout again to print an output sample, and check the adjustment results.
8.
Make adjustments again if necessary (Step 6).
9.
Press Save.
Z Fold Half Sheet Position Adjustment
Adjust the A fold position.
1.
Select Z Fold Half Sheet- A3, Z Fold Half Sheet- B4, Z Fold Half Sheet-11x17”, or Z Fold
Half Sheet - 8K, and press Change Settings.