Allstar Products Group 8833 OCS - Manual (Page 2)

Page 2 of 4 P/N 107343 Rev D
IMPROPER WIRING COULD CAUSE ELECTROCUTION OR DAMAGE TO CIRCUITRY.
FOLLOW LOCAL BUILDING AND ELECTRICAL CODES.
WARNING
TO PREVENT ELECTROCUTION DISCONNECT POWER AT FUSE BOX AND DOOR OPENER
BEFORE WIRING PERMANENTLY.
WARNING
DO NOT USE RADIO CONTROLS ON COMMERCIAL DOOR OPERATORS UNLESS PROPER
ENTRAPMENT PROTECTION DEVICES ARE INSTALLED. CONSULT THE MANUFACTURER OF
YOUR OPERATOR FOR MORE DETAILS.
WARNING
The various Transmitter models are shown below. All models may be coded to work with Allstar 3-channel Receivers such as the
831R, 831RE and the 8833R. Refer to the individual instructions for proper wiring of the Receivers.
Follow the directions on the next page for proper Transmitter/Receiver Coding!
733
Rotary Switch
selects door
A, B or C
Slide Switch
selects door
A, B or C
8833C-OCS
Rotary Switch
selects door
1, 2, 3, ... or 9
639
Combination of
both Rotary
Switches selects
door
Examples: A1, B7,
C9, etc.
831
STOP
CLOSE
OPEN
8833-OCS
STOP
CLOSE
OPEN
535
COMMERCIAL TRANSMITTER MODELS