Ipsec, Enabling ipsec, Disabling ipsec at the control panel – Xerox WorkCentre 7970-2606 User Manual
Page 100: Managing actions, Managing protocol groups
Security
100
Xerox
®
WorkCentre
®
7970 Multifunction Printer
System Administrator Guide
IPsec
Internet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol (IP)
communications by authenticating and encrypting each IP data packet. It allows you to control IP
communication by creating protocol groups, policies, and actions.
You can control IP communication on the printer for the following:
•
DHCP v4/v6 (TCP and UDP)
•
DNS (TCP and UDP)
•
FTP (TCP)
•
HTTP (Scan Out, TCP port 80)
•
HTTPS (Scan Out, TCP port 443)
•
HTTPS (Web Server, TCP port 443)
•
ICMP v4/v6
•
IPP (TCP port 631)
•
LPR Print (TCP port 515)
•
Port 9100 Print (TCP port 9100)
•
SMTP (TCP/UDP port 25)
•
SNMP (TCP/UDP port 161)
•
SNMP Traps (TCP/UDP port 162)
•
WS-Discovery (UDP port 3702)
•
Up to 10 additional services
Enabling IPsec
1.
In CentreWare Internet Services, click Properties>Security.
2.
Click IPsec.
3.
Under Enablement, select Enabled.
4.
Click Apply to save the new settings or Undo to retain the previous settings.
Disabling IPsec at the Control Panel
1.
At the printer control panel, press the Machine Status button, then touch the Tools tab.
2.
Touch Security Settings>IPsec.
3.
Touch Disable IPsec.
Note:
IPsec can be enabled in CentreWare Internet Services only.
Managing Actions
Use actions to more specifically manage how IPsec controls dependent protocols.
Managing Protocol Groups
Protocol Groups are logical groupings of selected protocols based on service type, service name, port
number, and device type. Create a Protocol Group to apply specific security policies for selected
protocols.