Xerox WorkCentre M123-M128-3048 - Manual (Page 94)

Replacing the Toner Cartridge
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide 93
Replacing the Toner Cartridge
The toner cartridge is a customer replaceable unit. After approximately 30,000 copies/
prints, the touch screen will display a message that it is time to replace the cartridge.
When ordering a new cartridge, use the following table to determine the correct reorder
code for your machine.
Instructions for replacing the toner cartridge are included with the replacement
cartridge and in the User Guide on the Documentation CD-ROM or on the website:
www.office.xerox.com/support
Loading Staples
The finisher contains an automatic stapler. The stapler cartridge contains 5,000
staples. When the machine runs out of the staples, a message is displayed on the
touch screen. When this message is displayed, load a new staple case into the staple
cartridge by following the instructions included with the replacement cartridge or in the
User Guide on the Documentation CD-ROM or on the website:
www.office.xerox.com/support
NOTE: Load the correct staple case specified for the product model of the machine.
Country Part Number Comments
North and South America 6R1184
Europe, Asia and Africa 6R1183
All Countries 6R1182 Only for selected Xerox
maintenance agreements