Xerox DocuColor 2240-1534 - Manual (Page 6)

Page 6
Jobs with invalid page ranges do not print
In the Splash RPX-i Job Edit dialog box, you can enter page numbers in the Page Range field
that are beyond the actual job’s page count. If the page range you enter exceeds the job’s page
count, the job does not print. If the File Handling option is set to Print and Delete, the job is
deleted from the Splash RPX-i.
DocuColor 240/250 Auto Size Detect finds wrong size for custom page size
When a custom page size is placed in a tray in the copier, the DocuColor 240/250 Auto Size
Detect feature selects the closest standard page size. While this may produce an inches or
millimeters measurement that looks like a custom page size, it is incorrect. Under the
DocuColor 240/250 Tray Attributes setting, use the Variable Size selection and manually
enter the custom page size. For more information, see the documentation that accompanies
the DocuColor 240/250.
DocuColor 240/250 and Splash RPX-i show custom page sizes in opposite order
The DocuColor 240/250 displays custom page sizes in the feed direction by cross direction
order while the Splash RPX-i shows them as cross direction by feed direction. For example,
the DocuColor 240/250 shows 9"
x 12" Long Edge Feed as 9" x 12", while the Splash RPX-i
shows it as 12" x 9".
Cover page fails if Plain/Recycled paper trays are not installed
The Splash cover page always prints using Automatic tray selection and only Plain, Recycled,
and Custom 1-5 are allowed for Automatic. If Plain/Recycled/Custom paper stock is not
installed for the default paper size in the DocuColor 240/250, all jobs with cover page
enabled move to the Error queue after printing.
May need to quit the Splash Server when the controller connection is changed
If you change the copier that is connected to the Splash Server with a copier that has a
different number of paper trays, you need to quit the Splash Server and restart it.
Server Notes ColorTuner marquee areas move when stapling is selected
Marquee areas defined in ColorTuner may move if the job is reprinted with stapling on,
depending on the rotation setting. Disable stapling when you reprint the job if this problem
occurs.
Map A3/Tabloid, A4/Letter errors when specific tray selected
When the Splash Server preference “Map A4/Letter and A3/Tabloid” is selected and a
job has a specific tray selected, a job error message is displayed unless the exact paper size
requested by the job is in the tray, even if the page size could have been mapped. As a
workaround, force the page size of the job to the specific page size in the tray.