Aussie VANTAGE 6804 - Manual (Page 8)

8
Step 5
Cabinet Upright Assembly
Attach Cabinet Upright to Cabinet Bottom and Front Crossbar with four 5/32 x .31” Bolts. Orient Upright so that Match-
holder/Chain is closest to top of cabinet (Front Crossbar).
Step 4
Front Crossbar Assembly
Turn cart assembly up on casters. Attach Front Crossbar, with the triangle braces facing down and the flat surface to
the front, to Side Panels with six 1/4-20 x .50” Bolts into the threaded holes in the top inside ends of Side Panels.
front crossbar
5/32 x .31” Bolt set
4 pc
1/4-20 x .50” Bolt set
6 pc