Audiovox Movies2Go 128-8290 - Manual (Page 23)

23
ACCESSORIES
WIRELESS HEADPHONES
The MMD11 includes a built-in infrared transmitter for use with wireless headphones (purchased separately). The headphone volume is
adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight
from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your
wireless headphones.
SOURCE FEATURE
AV1
The AV input may be connected to a Video Cassette Player (VCP), video game system, or other audio/video devices. To access the
A/V inputs, turn the MMD11 on and press the source button on the MMD11 or the Source button on the remote control until "AV1" is
displayed on the screen. Turn the audio/video source component on with its power button or remote control. The MMD11 is now ready to play
the audio and video signals from the source connected to AV1 input (use
.
AUX
The MMD11 will accept an audio / video input through the 3 RCA jacks located on the rear of the unit. The audio / video device could be a
video game system, video camera, or other input device.
Video Out
The MMD11 provides a video output for optional audio/video monitor(s). This output will provide an audio/video signal that duplicates the
signal displayed by the MMD11 to an additional monitor or video display. Please see your installer for more information.
accessory cable part number 11236820 required)