Audio-Technica AT-LP2D-USB - Manual (Page 17)

17
Additional Macintosh audio settings
We have set the Audacity playback and record settings. Now it's time to set the
separate Macintosh audio playback and record settings.
1. Go to Applications > Utilities > then select and open Audio MIDI Setup .
2. In the Audio Midi window under the tab Audio Devices , select the following:
• Under System Settings, Default Input, select USB Audio CODEC .
• Under System Settings, Properties For, select USB Audio CODEC .
• Under Default output, select Built-in Audio , or Built-in Output .
• For System output, select Built-in Audio .
This will allow other programs (in addition to Audacity) to use your Mac's internal
sound card for audio output.