Avid Technology HP Z800 User Manual
Page 3
Page 3 of 9 Joe Conforti
– Avid Technology – July 24th, 2009
REV A1
4.) Slot Configuration:
DX Hardware
1394 Mojo-SDI Hardware
Slot #
Electrical
Mechanical
1
x4 PCI-E Gen 2
x8
Avid HIB, DX Interface HBA
(Active only)
7030-20084-01
1394b PCI-Express HBA required
(w 8K buffers) specific info below
1394 Mojo-SDI must connect here
2
x16 PCI-E Gen 2
(225Watts)
x16
Quadro FX 4800
Quadro FX 4800
3
x4 PCI-E Gen 1
x8
Not Used
Not Used
4
x8 PCI-E Gen 2
x16
Shared Storage Controllers:
Atto FC-41ES - MediaNet
Intel PRO 1000 PT - ISIS
Intel PRO 1000 PF - ISIS
Chelsio S310E-SR - ISIS 10Gb
Shared Storage Controllers:
Atto FC-41ES - MediaNet
Intel PRO 1000 PT - ISIS
Intel PRO 1000 PF - ISIS
Chelsio S310E-SR - ISIS 10Gb
5
x16 PCI-E Gen 2
(225Watts)
x16
Local Storage Controllers:
Atto R380 - SAS VRII ST support
Atto UL5D - Legacy u320 SCSI support
Local Storage Controllers:
Atto R380 - SAS VRII ST support
Atto UL5D - Legacy u320 SCSI support
(The UL5D BIOS should be disabled)
6
PCI-E 32bit /33MHz
PCI 32/33
Secondary SAS Port (Embedded)
Secondary SAS Port (Embedded)
7
x8 PCI-E Gen 2
x16
Not Used
Not Used
Embedded Broadcom
BCM5764 GbE NIC
PCI-E x1
Gen 1
Not qualified for Avid ISIS Connectivity
Qualified for Avid MediaNetwork AECIFs
Not qualified for Avid ISIS Connectivity
Qualified for Avid MediaNetwork AECIFs
5.) 1394 Mojo-SDI configuration requirements (slot #1 requirement)
1394 Mojo-SDI must connect via specific add-in 1394b PCI-Express Firewire cards (with 8K buffers) which must be
installed in Slot #1.
The Z800 embedded 1394 port cannot be used for connectivity to 1394 Mojo-SDI.
Current qualified PCI-Express 1394b Firewire cards are:
1.) StarTech PEX1394B3 StarTech PEX1394B3
(AVID P/N 7030-30029-01)
2.) Dynex DX-PCI2PF
3.) Point Grey Research FWB-PCIE-01