APC IP DSLAM - Manual (Page 9)

RADIUS server connectivity, Web-based, 802.1x
Dynamic Host Configuration Protocol (DHCP) for IP resolution.
DHCP Server and Relay services.
NTP (Network Time Protocol).
CPE Management:
Port Filtering: Port blocking.
Max CPE: Restriction on the maximum number of CPEs supported on each DSL port.
IP Filtering.
DHCP Filtering: Prevents damage caused by unauthorized private DHCP Server operation.
NetBEUI and NetBIOS Filtering.
Static IP chain: Prohibits illegal IP address usage of subscribers.
Access Control List.
Reliability Physical: CPU, Uplink, Annex-C clock, Power redundancy (Battery Backup port)
Logical: STP, RSTP.
VLAN Supports IEEE 802.1q VLAN Tagging.
Multicast per VLAN.
Routing Wire speed packet forwarding.
Wire speed packet filtering.
Static Routing.
Standard protocols: RIP v1/v2, OSPF, VRRP, BGP-4 and IS-IS (Future software release)
Link aggregation IEEE 802.3ad Link aggregation.
Max. 26 aggregation groups available regardless of port type.
QoS Layer 4-7 application-flow switching and QoS.
Rate Limiting.
Diff-Serv.
Multi-Field Packet Classification on a per packet basis.
802.1p Marking and Reclassification.
ToS Marking and Reclassification.
Diff-Serv Differentiated Services Code Point field (DSCP) Marking and Reclassification.
Congestion Control: Weighted Random Early Detection (WRED) to avoid congestion at the egress
queues.
Scheduling: Weighted Fair Queuing (WFQ).
Multi level Queue Support : 8 queues per PVC
Multiple PVC support : 5 PVC per port (future software release)
ATM Traffic management : UBR, CBR, rt-VBR, nrt-VBR, Unshaped (future software release)
Multicast and Multicast
Routing IGMP v2.0.
IGMP snooping.
DVMRP
PIM-SM
www.corecess.com Release 1.0 (2004/07/29) 9