AEG SKS68240F0 - Manual (Page 38)

9. Install the part (Ha) on the inner side of
the kitchen furniture.
10. Push the part (Hc) on the part (Ha).
11. Open the appliance door and the kitch-
en furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and
the furniture door and mark the holes.
Remove the small squares and drill
holes with ø 2 mm at 8 mm from the
outer edge of the door.
Place the small square on the guide
again and fix it with the screws supplied.
21 mm
ca. 50 mm
90°
ca. 50 mm
21 mm
Ha
Hc
Ha
Hb
8 mm
38 Installation