Admiral AAW-06CM1FHUE - Manual (Page 13)

Mode
Timer Fan
Airconditione r
How to Insert the Batteries
Remove the battery cover according to the arrow direction.
Insert new batteries making sure that the (+) and (-) of
battery are matched correctly.
Reattach the cover by sliding it back into position.
Note:
Use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries.
Replace batteries with new ones of the same type when the display
becomes dim.
12
Signal receptor
Remote control
If the replacement is done within 1 minute, the remote control
will keep original presetting.
Operating Instructions
How to Use
To operate the room air conditioner , aim
the remote control to the signal receptor.
The remote control will operate the air
conditioner at a distance of up to 23 feet
when pointing at signal receptor of indoor
unit.
The remote control is NOT preset as Cooling
only or Heat Pump by manufacturer.
Each time after the remote control replaces batteries
or is energized, the Cooling indicator and Heating
indicator will flashes alternately on LCD of the remote control.
User can preset the remote control type depending
on the air conditioner type you have purchased as follows:
Press any button when flashes, Heat Pump will be set.
Press any button when flashes, Cooling Only will be set.
If you don not press any button within 12 seconds, the remote control will be set as Heat Pump
automatically.
Back-light function(optional)
Remote Control presetting
Hold down any button of rem ote control for about 2 seconds, back-light turns on. Release the
button, it lights off automatically 10 seconds later.