AEG L61470WDBI - Manual (Page 10)

5.4 Start/Pause button 4
Press button 4 to start or interrupt a
programme.
5.5 Delay start button 5
Press button 5 to delay the start of a
programme from 30 minutes to 20 hours.
5.6 Time save button 6
Press the button 6 to decrease the
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
5.7 Drying time button 7
Press this button to set the time that
suits the fabrics you have to dry. The dis-
play shows the set value.
Each time you press this button the time
value increases by 5 minutes.
You cannot set all time values for
different types of fabrics.
5.8 Automatic dry button 8
Press this button to set an automatic lev-
el of dryness for the laundry. The display
shows the symbol of the set level.
• Extra dry
• Cupboard dry
• Iron dry
You can not set all automatic lev-
els for each type of fabrics.
5.9 Permanent extra rinse
function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
6 and button 5 at the same time
until the indicator of button 7 is on.
• To deactivate the function press but-
ton 6 and button 5 at the same
time until the indicator of button 7 is
off.
5.10 Spin button 9
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
Spin phase is off.
'Rinse Hold' function is
on.
5.11 Temperature button 10
Press button 10 to change the default
temperature.
- - = cold water
5.12 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
8 and button 7 at
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
5.13 Child lock function
This function prevents children to play
with the control panel.
10 www.aeg.com