AEG SKS68240F0 - Manual (Page 31)

On the opposite side:
1. Tighten the lower pin.
2. Install the spacer.
3. Install the door.
4. Tighten the upper pin.
7.4 Ventilation requirements
5 cm
min.
200 cm 2
min.
200 cm 2
The airflow behind the appliance must
be sufficient.
7.5 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
Do the following steps:
x
x
If necessary cut the adhesive sealing strip
and then apply it to the appliance as
shown in figure.
ENGLISH
31