Aiwa NSX-AJ800 - Manual (Page 16)

16
En
Programmed Edit Recording
As you program the CD tracks to record, Programmed Edit
Recording displays the remaining recording time for each side
of the tape, so you can easily select a set of desired tracks
within the length of your tape.
1 Insert the recording tape in DECK 2.
2 Press CD to select the CD function and load the
disc.
3 Press CD EDIT/CHECK (SHIFT+CD EDIT/CHECK
on the remote control) twice.
The "PRGM" and "EDIT" indicators light up and
"PRGMC-00" appears on the display.
4 Press the numbered buttons on the remote
control to enter the length of the recording tape.
10 to 99 minutes can be specified.
• f, g or MULTI JOG can also be used to specify
tape length.
5 Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press the numbered buttons on the remote
control to select the first track to be recorded on
side A.
-To select the 25th track, press +10, +10 and 5.
-To select the 10th track, press +10 and 0.
6 Repeat step 5 to select the rest of the tracks for
side A.
The remaining recording time of side A is displayed. You
cannot select a track with a longer playing time.
7 Press CD EDIT/CHECK to switch to side B and
select the tracks for the side.
Side A
Tab for side A
8 Press CD EDIT/CHECK to switch back to side A
and press wREC/REC MUTE to start recording
on side A.
The tape is rewound to the beginning of side A and
recording starts.
Go to the next step when recording on side A finishes.
9 Press CD EDIT/CHECK to switch to side B, turn
over the tape, and press wREC/REC MUTE to
start recording on side B.
•You cannot program more than 30 tracks. "FULL" is
displayed.
•You cannot program a track with a track number larger than
30.
•Recording cannot start from a point halfway in the tape.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, press CD EDIT/CHECK to select side A or
B.
2 Press f or g repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Press CD EDIT/CHECK to select side A or B, and press
sCLEAR to clear the program for the selected side. Then,
select tracks again.
To clear the edit program
Press sCLEAR twice so that "EDIT" disappears from the
display.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.