AEG Solo combo 15 - Manual (Page 22)

20
If you have not subscribed to Caller Line Identification service, the handset will display “UNKNOWN”
when you receive the call.
12.1 Call Log on your Cordless Handset
The Call Log stores the last 40 external calls, whether or not you have answered the call.
Only the most recent call is saved if there are repeat calls from the same number.
When the Call Log is full, the next new call will replace the oldest entry.
12.1.1 Access the Call Log on your Cordless Handset
t
From the home screen, press .
t
Press
to browse through the call list.
>The calls are displayed in chronological order with the most recent call at the top of the list.
12.1.2 Save a Call Log Entry into the Phonebook on your Cordless Handset
t
From the home screen, press
.
t
Press
to select an entry and then press .
t
Press
again to select “SAVE NUMBER”.
t
Enter the name of the contact (maximum 12 characters) and then press
to save.
>A confirmation tone is played.
t
Press to return to standby mode.
12.1.3 Delete a Call Log Entry on your Cordless Handset
t
From the home screen, press
.
t
Press to select an entry and then press .
t
Press
to “DELETE” and then press to select.
>“DELETE?” is displayed.
t
Press again to confirm.
>A confirmation tone is played.
t
Press to return to standby mode.
12.1.4 Delete All Entries in the Call Log on your Cordless Handset
t
From the home screen, press .
t
Press
.
t
Press to “DELETE ALL” and then press to select.
>“DELETE?” is displayed.
t
Press
again to confirm and delete all entries from this handset‘s call log. (None will be deleted
from the call log on the base or any other cordless handsets.)
>A confirmation tone is played.
12.2 Redial List on your Cordless Handset
The redial list stores the last 5 numbers dialled from that handset. A maximum of 24 digits can be
displayed for each entry.
12.2.1 Access the Redial List on your Cordless Handset
t
From the home screen, press
.
t
Press to browse the redial list.
>The last dialled number will appear first in the redial list.
>If the number has more than 12 digits, press to see the other digits.
>If there are no numbers in the redial list, “NO NUMBER” is displayed.