Care and cleaning, 1 shelf supports removing the shelf supports, Installing the shelf supports – AEG BP5304001M User Manual

Page 19: 2 lamp

Advertising
background image

10. CARE AND CLEANING

WARNING!
Refer to the Safety chapters.

Notes on cleaning:
• Clean the front of the appliance with a

soft cloth with warm water and a
cleaning agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the appliance interior after each

use. Then you can remove dirt more
easily and it does not burn on.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with
warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.

10.1 Shelf supports

Removing the shelf supports

You can remove the shelf supports to
clean the side walls.

1.

Pull the front of the shelf support
away from the side wall.

1

2

2.

Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.

Installing the shelf supports

Install the shelf supports in the opposite
sequence.

Valid for telescopic runners:
The retaining pins on the tele-
scopic runners must point to the
front.

10.2 Lamp

WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass
cover can be hot.

Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or

deactivate the circuit breaker.

ENGLISH

19

Advertising
This manual is related to the following products: