AEG L89499FL - Manual (Page 16)

3. The indicator of button 4 flashes
with red colour.
4. The display shows the default tem-
perature and spin and the empty in-
dicator bars of the available func-
tions.
5. If it is necessary, press button 10
and button 9 to change the water
temperature and the spin speed.
6. If necessary, press the related but-
tons to add some functions or to set
a delayed start. The display shows
the symbol of the set function and
the digit (I) shows the delayed time.
8.2 Loading the laundry
1. Open the appliance door.
2. The display (J) shows the maximum
load for the programme (MAX) and
the weight of the laundry (KG).
3. Put the laundry in the drum, one
item at time. Shake the items before
you put them in the drum.
4. On the display the weight of the
laundry updates by steps of kg 0.5.
The weight is indicative and changes
with the type of the laundry.
If you put in the drum more laun-
dry than the maximum load, the
symbols MAX and the value 0.0
start to flash.
You can wash your laundry but
the water and energy consump-
tion increase.
To have the best consumption
and washing performance re-
move some items until the sym-
bols stop to flash.
The overload indication is availa-
ble only for programmes with a
maximum load lower than the
appliance maximum load.
5. Close the door. The value 0.0 near
the symbol % on the display shows
the quantity of the detergent to use.
This data is indicative and refers to
the detergent quantity for a maxi-
mum load that the manufacturer rec-
ommends.
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
16 www.aeg.com