AEG F99009W0P - Manual (Page 11)

Menu Submenu Description of the function
Brightness
(10 levels are available).
You can change the intensity
of the display.
Factory setting: 10.
Contrast
(10 levels are available).
You can change the contrast of
the display.
Factory setting: 6.
Reset settings You can go back to the factory
setting of the appliance.
Water hardness
(10 levels are available).
You can adjust the level of the
water softener. Refer to 'Set-
ting the water softener'.
Factory setting: 5.
Rinse aid
On
Off
You can activate the rinse aid
dispenser. This function is
available only when the multi-
tab function is on.
Back To go back to the menu option.
Wash guide Program guide The display shows information
about the washing pro-
grammes.
Option guide The display shows information
about the functions.
Demo mode
On
Off You can simulate a washing
programme. Refer to Demo
mode .
Factory setting: Off .
Back To go back to the menu option.
Demo mode
1. Go to the menu option.
2. Go to Wash Guide .
3. Press the OK touchpad to open the submenu.
4. Go to Demo mode and activate the function.
5. Press the display touchpad.
• The display shows the three areas (A), (B) and (C).
• The top left corner of the display shows DEMO. The function is activated.
Deactivate the function to operate the appliance.
Control panel 11