AEG DE4003000M - Manual (Page 27)

Problem Possible cause Solution
The display shows an er-
ror code that is not in
this list There is an electronic
fault • Switch off the appli-
ance with the house
fuse or the safety
switch in the fuse box
and switch it on again
• If the display shows
the error code again,
refer to the Customer
Care Department
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on the front frame of the appliance cavi-
ty.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
13. INSTALLATION
WARNING!
Refer to the Safety chapters. The built-in unit must meet the
stability requirements of DIN
68930.
8
114 16
8
888
594
547 21
872
560-570
20
550
875
538
ENGLISH
27