Configurations, Remote control – Audio2000's AVC7504 User Manual

Page 9

Advertising
background image

1
2
3
4
5

6
7

8

9

10

11

12
13
14
15

16

17

18

1. POWER - This button is used to turn the AVC7504 unit “ON”

or place the unit at the “Standby ” mode.

2. DEFAULT - Press this button to reset the unit to the factory

settings.

3. PBC - The PBC (Play Back Control)button toggles the PBC

mode ON/OFF. When in PBC mode, the tracks or scenes can
be accesed directly by using the Number Key Pad. The PBC
can be applied to the disc with 2.0 MPEG 1 coding only.

4. RETURN - Press this button to leave the PBC mode.
5. REPEAT -

6. A-B -

AVC7504

Press this button once to Pause the disc playback. Press this

button again to stop the disc playback.

Press this button once to pause the disc playback.

Press this button again to initiate the disc playback.

This button cycles through the available repeat options.

Repeat options vary from type of disc so see the Operations
section of this manual for detailed instructions on using the
repeat function for every kind of disc.

Allows you to set a section on a disc

for continuous looping. See the Operations section in this
manual for detailed instructions on using the A-B loop feature.

7. PROGRAM - Opens the program menu. The

can program the playback order of up to 20 tracks

on a disc. See the Operations section of this manual for

detailed instructions on programming a custom track order.

8. CLEAR - Clears any numbers typed into a menu before

a selection has been made.

9. TITLE - Accesses the title screen on a DVD.
10.DIRECTIONAL - (< ^ > v) - These buttons allow you

to navigate through the DVD menu screens, Setup Pages, and
Mp3 menus.

11.MENU - Accesses the main menu on a DVD and other

discs with main menus.

12.3D - This button cycles through the following sound effects: Off,

Concert, Living, Hall, Bathroom, Cave, Arena, and Church.

13.

14.PSCAN - This button toggles between the different variants of

component video, YUV (US), S- Video and VGA.

15.

-

16.Number/Preset buttons - Use these buttons to jump

directly to a track in Disc mode. See the Disc and Tuner

Operations sections of this manual for detailed instructions

on using the Number/Preset buttons.

17.

- Scans through a track when

in DISC mode: B-Scan (

) scans backwards through the current

track and F-Scan (

) scans forwards through the current track.

Pressing the B-Scan or F-Scan button once will change the scan
speed to "2X". If the B-Scan or F-Scan button is pressed multiple
times, the scan speed will be changed to "2X", "4X", "8X", "16X", or
"32X". When the scan speed is at "32X", press the same B-Scan or
F-Scan button again will reset the scan speed to the normal speed
(1X).

18.+,

, SELECT - The Select button toggles between "VOL" and "KEY".

When "VOL" is selected, press the "+" button to increase or press the

" button to decrease the AVC7504 audio output level (0-20).

When"KEY" is selected, press the "+" button to increase or press the
"

" button to decrease the level of key control (+/

8). Pressing the

"+"or “

" button directly (without selecting the function by pressing

the "SELECT" button) will have the AVC7504 audio output level
adjusted. These buttons will not be reset by pressing the "Default"
button.

7

Configurations

REMOTE CONTROL:

ACC7504-1

Advertising