Child lock function, Starting a programme, Change a programme – AEG T86580IH User Manual

Page 15: At the end of programme

Advertising
background image

1. Set the drying programme and

functions.

2. Push the Delay start button again

and again until the necessary time
of the delay come into the view on
the display (e.g. if the pro-
gramme has to start after 12 hours.)

3. To activate the Delay start function,

push the Start/Pause button. The
time to start decreases on the dis-
play.

CHILD LOCK FUNCTION

The child lock can be set to prevent the
children to play with the appliance. The
child lock function locks all push but-
tons and the programme dial (this func-
tion does not lock Auto/Off button). To
activate the child lock function push the
Dry Plus and Delicate buttons at the
same time until the symbol come in-
to view on the display. To deactivate
push again the above buttons until the
symbol go out of view.
You can activate the child lock function:
• before you push the Start/Pause but-

ton - the appliance cannot start

• after you push the Start/Pause button

- all the push buttons and the pro-
gramme dial are deactivated

STARTING A PROGRAMME

To activate the programme push the
button as on the illustration. The LED
above the button illuminates in red col-
our.

CHANGE A PROGRAMME

To change a programme, push the Au-
to/Off button to deactivate appliance.
Push the Auto/Off to activate the appli-
ance and then set the programme
again.

AT THE END OF PROGRAMME

When the drying cycle is completed,
the symbol flashes on the display. If
the Buzzer function is on, an acoustic
signal sounds intermittently for one mi-
nute.
To remove the laundry:
1. Push the Auto/Off button for 2 sec-

onds to deactivate the appliance.

2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.

After each drying cycle:

• clean the filter
• drain the water container
(See chapter CARE AND CLEANING.)

ENGLISH

15

Advertising