AEG T86280IC - Manual (Page 12)

- the default selection which is rela-
ted to the programme.
— the selection to get the laundry
lightly dried.
— the selection to get the laundry
more dried.
7.8 The Reverse Plus function
To dry more lightly the sensitive and
temperature sensitive textiles (e.g. acryl-
ic, viscose). This function helps also to
decrease the creases on the laundry. For
fabrics with the symbol
on the fabric
label.
7.9 The Anticrease function
Extends anticrease phase (30 minutes) at
the end of the drying cycle to 90 mi-
nutes. This function prevents laundry
from creases. Laundry can be removed
during the anticrease phase.
7.10 The Buzzer function
When the buzzer function is activated
you can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.
7.11 The Time Drying function
Operates only with the Time pro-
gramme. Lets the user to set special
time of drying programme from mini-
mum 10 min. to maximum of 2 hours (in
10 min. steps).
7.12 The Delay Start function
Let to delay the start of a drying
programme from minimum of 30
minutes to maximum of 20 hours.
1. Set the drying programme and func-
tions.
2. Push the Delay start button again
and again until the necessary time of
the delay come into the view on the
display (e.g. if the programme
has to start after 12 hours.)
3. To activate the Delay start function,
push the Start/Pause button. The
time to start decreases on the dis-
play.
7.13 Child lock function
The child lock can be set to prevent the
children to play with the appliance. The
child lock function locks all push buttons
and the programme dial (this function
does not lock On/Off button). To acti-
vate the child lock function push the Dry
Plus and Reverse Plus buttons at the
same time until the symbol
come into
view on the display. To deactivate push
again the above buttons until the symbol
go out of view.
You can activate the child lock function:
• before you push the Start/Pause but-
ton - the appliance cannot start
• after you push the Start/Pause button
- all the push buttons and the pro-
gramme dial are deactivated
7.14 Starting a programme
To activate the programme push the
Start/Pause button. The LED above the
push button changes the colour to red.
7.15 Change a programme
To change a programme, push the On/
Off button to deactivate appliance. Push
the On/Off to activate the appliance and
then set the programme again.
7.16 At the end of programme
When the drying cycle is completed, the
symbol flashes on the display. If the
Buzzer function is on, an acoustic signal
sounds intermittently for one minute.
To remove the laundry:
12 www.aeg.com