Asus P2L97 - Manual (Page 13)

ASUS P2L97 User’s Manual 13
III. INSTALLATION
III. INST
ALLA
TION
(Jumpers)
Jumper Settings
1. Real Time Clock (RTC) RAM (CLRTC)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer and unplug your AC power, (2) Short the
two points (Labeled: CLRTC), (3) Turn on your computer, (4) Hold down
<Delete> during bootup and enter BIOS setup to re-enter user preferences.
Short small solder points to clear
P2L97 Clear RTC RAM
CLRTC
R
2. Keyboard Power Up (KB_UP)
This allows you to disable or enable the keyboard power up function. Set to
Enable if you want to use your keyboard (by pressing <Spacebar>) to power up
your computer. This feature requires an ATX power supply that can supply at
least 300mA on the +5VSB lead and the new ACPI BIOS support. The default is
set to Disable because not all computers have the appropriate ATX power sup-
ply. Your computer will not function if you set this to Enable and if you do not
have the right ATX power supply.
1
Disable
(Default)
P2L97 Keyboard Power (Wake) Up
2
3
Enable
KB_UP KB_UP
1
2
3
R