AEG F65040IM0P - Manual (Page 20)

Cancelling the delay start
If the delay start has not started, you can change the selection.
To change the selection while the delay start operates, it is necessary to cancel the delay
start. When you cancel a delay start, this automatically cancels the washing programme.
1. Press and hold the OPTION button and the OK START button at the same time.
2. Release the buttons when the display shows the message CONFIRM CANCEL ? .
3. Press the OK START button to confirm.
• Delay start and washing programme are cancelled. The display shows the message
CHOOSE PROGRAMME .
End of the washing programme
When the washing programme is completed, an intermittent acoustic signal sounds.
1. Open the appliance door.
• The display shows the message PROGRAMME END and the message PLEASE
SWITCH OFF . (If the salt container and/or the rinse aid dispenser are empty, the
salt and/or rinse aid messages replace the message PLEASE SWITCH OFF ).
2. Deactivate the appliance.
3. For better drying results, keep the appliance door ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you remove them from the appliance. Hot dishes
can be easily damaged.
• First remove the items from the lower basket, then from the upper basket.
• There can be water on the sides and on the door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
CARE AND CLEANING
To remove and clean the filters
Dirty filters decrease the washing results.
Although the maintenance is very low with these filters, make a check at intervals and if
necessary, clean them.
1. Turn the filter (A) counterclockwise and
remove it out from filter (B).
A
B
20 Care and cleaning