The time drying function, The delay start function, Child lock function – AEG T86280IC User Manual

Page 15: Starting a programme, Change a programme, At the end of programme

Advertising
background image

• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.

THE TIME DRYING FUNCTION

Operates only with the Time pro-
gramme. Lets the user to set special
time of drying programme from mini-
mum 10 min. to maximum of 2 hours (in
10 min. steps).

THE DELAY START FUNCTION

Let to delay the start of a drying
programme from minimum of
30 minutes to maximum of 20
hours.

1. Set the drying programme and

functions.

2. Push the Delay start button again

and again until the necessary time
of the delay come into the view on
the display (e.g. if the pro-
gramme has to start after 12 hours.)

3. To activate the Delay start function,

push the Start/Pause button. The
time to start decreases on the dis-
play.

CHILD LOCK FUNCTION

The child lock can be set to prevent the
children to play with the appliance. The
child lock function locks all push but-
tons and the programme dial (this func-
tion does not lock On/Off button). To
activate the child lock function push the
Dry Plus and Reverse Plus buttons at
the same time until the symbol

come

into view on the display. To deactivate
push again the above buttons until the
symbol go out of view.
You can activate the child lock function:
• before you push the Start/Pause but-

ton - the appliance cannot start

• after you push the Start/Pause button

- all the push buttons and the pro-
gramme dial are deactivated

STARTING A PROGRAMME

To activate the programme push the
Start/Pause button. The LED above the
push button changes the colour to red.

CHANGE A PROGRAMME

To change a programme, push the On/
Off button to deactivate appliance.
Push the On/Off to activate the appli-
ance and then set the programme
again.

AT THE END OF PROGRAMME

When the drying cycle is completed,
the symbol flashes on the display. If
the Buzzer function is on, an acoustic
signal sounds intermittently for one mi-
nute.
To remove the laundry:
1. Push the On/Off button for 2 sec-

onds to deactivate the appliance.

2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.

After each drying cycle:

• clean the filter
• drain the water container
(See chapter CARE AND CLEANING.)

ENGLISH

15

Advertising