AEG BP8615001M - Manual (Page 17)

end time in approximately 30 mi-
nutes.
6. Make sure that the core temperature
sensor stays in the meat and in the
core temperature sensor socket dur-
ing the cooking.
7. If necessary, you can set a new core
temperature during the cooking. To
do this, touch
.
8. When the meat is at the set core
temperature, an acoustic signal
sounds. The appliance deactivates
automatically.
Touch a sensor field to stop the sig-
nal.
9. Remove the core temperature sen-
sor plug from the socket . Remove
the meat from the appliance.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and plug of the core tempera-
ture sensor.
9.3 Telescopic runners
°C
1. Pull out the right and left hand tele-
scopic runners.
°C
2. Put the wire shelf on the telescopic
runners and carefully push them into
the appliance.
Make sure you push back the tele-
scopic runners fully in the appliance
before you close the oven door.
Keep the installation instructions
for the telescopic runners for fu-
ture use.
With telescopic runners you can put in
and remove the shelves more easily.
CAUTION!
Do not clean the telescopic run-
ners in the dishwasher. Do not lu-
bricate the telescopic runners.
ENGLISH
17