AEG S - Manual (Page 10)

10
Technical Specifications
the jumper leads meet the requirements of DiN 72553 and are suitable for
wiring system voltages from of 12 V and 24 V.
the leads consist of insulated, copper-clad aluminium wires with fully insulated
terminal clamps.
Typ Item No. Cross-section* /
Length
For engine displacement
up to
Petrol
Diesel
sP 16 97203 16 mm² /
2 x 3 m
2500 cm³ -
sP 25 97204 25 mm² /
2 x 3,5 m
5500 cm³ 3000 cm³
sP 35 97205 35 mm² /
2 x 4,5 m
7000 cm³ 4000 cm³
* the electric conductance corresponds to a copper lead of this cross-section.
firSt aiD
in the event of contact with battery acid immediately wash or flush the affected
areas under running water. Seek immediate medical attention for chemical
burns of the eye or mucous membranes.