AEG Voxtel D220bt User Manual
Page 19
19
UK
7.12
Find the handset
You can locate the handset by pressing the Find button in the middle
of the front of the base station. All the handsets registered to the base
will produce the paging tone and show “PAGING“ on the display for
60 seconds.
You can stop the paging by pressing / / on any handset or
on the base again.
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
7.13
Make an internal call (Multi-handset versions only)
This feature is only applicable when there are at least two registered
handsets or at least one handset and a headset.
It allows you to make internal calls, transfer external calls from one
handset to another handset / headset and make conference calls. If
the called handset / headset is not answered within 60 seconds, the
called handset / headset will stop ringing and the calling handset will
return to standby mode.
Note:
If only one handset is registered to the base station, when
is
pressed, it will display “NOT POSSIBLE”.
7.13.1
Intercom another handset
tIn idle mode, press and all the other registered handset numbers
will display, along with a “9“.
tEnter the number of the handset that you want to call, or enter 9 to
call all handsets.
tThe called handset rings and must be pressed on that handset to
establish the intercom call.
Note:
If only one other handset is registered to the base station, pressing
will call the other handset immediately.