ALK Technologies LAPTOP 7 - Manual (Page 26)

- 26 -
Guidance Mode
Passenger vs. Driver Safety Screen
In Guidance Mode, CoPilot provides two different display formats for maps and on-screen
directions that change as you drive. You can switch between the Passenger screen and the
Driver Safety screen by clicking the Driver/Passenger button at the top of the Navigation
Control Panel (see p. 29).
In the Passenger screen, your map will always be shown. In the Driver Safety screen,
your map will not be shown when you drive at more than 10 m.p.h.; however, you will still
receive verbal instructions as well as simple printed directions on-screen. NOTE: When
driving in Australia, all screen buttons are disabled in the Driver Safety screen.
IMPORTANT: The driver should pull over to the side of the road when looking at the map
and/or the Navigation Control Panel. Even if a passenger operates the computer, for safety
reasons, the driver should never look at the computer screen while driving.
Passenger Screen Driver Safety Screen
Click here to
change screens