AEG Cooling Basket KS 26 - Manual (Page 16)

16
USE
Assembly
1. Unfold the basket.
2. Secure the supporting frame to the basket using
the four hook-and-loop fasteners.
Information about use
▪
The 12 V car outlet may possibly only activate after switching on the ignition. Ple-
ase refer to the vehicle’s operating manual. Contact a specialised shop if insure.
▪
Do not cover the device during use and ensure proper ventilation.
▪
Promptly wipe up any condensation. After extended cooling periods moisture will
condense into water drops inside the coolbag. This does not mean the device is
defective.
Cooling
1. For sanitation reasons please clean the inside of the coolbag with a damp cloth
before every use.
2. Fill the coolbag with the objects you wish to cool.
3. Plug the car plug into your vehicle’s 12 V outlet. The green lED on the car plug
will light up.
4. The coolbag will start cooling.
Attention: The device does not shut off automatically. The cooling unit will run con-
stantly whilst the coolbag is connected to a power source. remember this will drain
the vehicle’s battery if the vehicle is not running.
5. Unplug the car plug from the 12 V car outlet to stop cooling and properly wind
up the cable.
6. Clean and dry the inside of the coolbag after every use. This will prevent mould
growth.